Introduction
As the outer package of medicament, capsule has already got an introduction history of more than a hundred years. Now the capsule field in the whole world develops with high speed.
The mass import of the product line and the hard capsule filling machine together with the successful design, making and quantity production of the same model in our country stimulate a revolution to replace the manual-made capsules with machine-made ones.
GYX7.5B products line is specialized equipment for the capsule making. It can produce 00#, 0#, 1#, 2#, 3# , 4#capsules by replacing some parts of it.
Characteristics of the capsule production
Comparatively speaking, capsule production is a complicated systems motorering.
It mainly consists of five aspects:
(1)Raw materials, auxiliary materials and relevant sol equipments;
(2)The constant temperature, constant humidity and undefiled workshop environments that the capsule production required;
(3)A well-functioning host (or the product line);
(4)A complete set of technical process that the capsule production required.
(5)Managers and technical staffs with higher quality and practiced jockeys after training.
Technical Parameters
Model | GYX7.5B |
Capacity | 75,000 capsules/hour |
Capsule size | 00#, 0#, 1#, 2#, 3# ,4# |
Power Supply | 220V, Three-phase and Five-wire |
Frequency | 60Hz±1Hz |
Powe capacity | 5Kw |
Power of Main machine | 3Kw |
Capsule room requirement | |
Temperature | 18.5°C~21.5°C adjustable |
Humidity | 40%~50% adjustable, ±2% |
Clean | 100000 class |
Floor | The roughness of ground within 20m is less than or equal to 15mm |
HVAC dehumidify requirement | (Cooling and dehumidifying are calculated according to 0# machine) 15KgH2O/h for single machine |
Wind exchange more than 38 times/hour | |
Noise intensity | Not stronger than 85dB(A) |